Skip to main content
(844) 422-7000
A woman in a cream blouse and navy slacks holds a white key card to a slim black reader, about the size of a light switch plate, mounted on old red brick beside a dark green office door

Access control upgrade

Replace your access control system and keep the wiring

Upgrade your building without replacing existing wiring while compatible readers and door hardware connect to a new hub after a site survey.

A man in a pressed blue button-down shirt stands at a white wall niche looking at a small grey box about the size of a hardcover book, with green terminal blocks and black and white cables running down to a black power supply on the shelf

Hardware remains in place

Existing door hardware stays where it is

Your building reuses existing wiring while one hub per two doors connects your lock, exit request device and position sensor after a survey checks your doors.

  1. 1

    Readers stay

    Listed Wiegand reader makers connect to hub terminals. Registering NFC cards in Access requires selecting a card format that matches reader output.

  2. 2

    Cable stays

    Retrofit Readers work with the wires already inside your walls. Our installers use your current cabling so we don't have to pull new lines through the building.

  3. 3

    Door hardware stays

    Connect your lock, exit button, and door sensor directly to the hub terminals. One hub manages every part of the door so you can monitor status and control entry.

Building systems for your industry

Upgrade your building while keeping the wiring and hardware you already have. Our retrofits give you better ways to manage access for offices, clinics, and schools.

Select your building type

Multi-tenant offices or suites retain compatible door hardware. Two doors connect per hub while managers register NFC cards in the Access application.

  • Support two doors per hub
  • Register NFC cards in Access
  • Connect to existing readers

Hubs store credentials locally for up to 10,000 users to keep suite doors operating during internet outages.

Hardware connections at each door

Hub terminals accommodate a reader, lock, position sensor, exit request device, and auxiliary output. Hardware components land on dedicated ports for independent control and monitoring.

Select components for details

1Reader2Lock3Exit request4Door position5Aux outputDoor hardwareRetrofit Hub

Reader

Reader

Supports third-party Wiegand readers or Retrofit Readers. Two reader terminals on the hub control two doors independently.

Terminal names and ratings are from the manufacturer's help article and datasheet.

Reader replacement options

Choose between keeping current readers or fitting new ones. Both options integrate with the hub terminals using existing wiring.

A woman in a white blouse and grey slacks holds her phone flat against a slim black reader, about the size of a light switch plate, on the brick wall beside a black steel door of an apartment building, with a palmetto in the bed beside it

Toggle reader types

Settings for third-party Wiegand readers are configured on the reader's own platform. Card formats chosen in Access must match the reader's output format.

Mixing Retrofit Readers and third-party Wiegand readers on one hub is not recommended by the manufacturer.

Hardware for the retrofit

Specific components replace the old controller and extend existing wiring. Every part serves a dedicated role in the upgrade process.

Retrofit Hub, a white box with rows of terminal blocks down both sides

Retrofit Hub

Supports two doors and two readers for up to 10,000 users. DIN rail mounted unit includes two Ethernet ports for indoor use only.

Retrofit Reader in black and in white, each a slim upright reader

Retrofit Reader

Measures 117 by 45 by 13.3 mm with IP55 rating for indoor and outdoor use. Supports NFC, Touch Pass and Wallet. Fingerprint model holds 300 fingerprints.

Retrofit PSU 12V, a white power supply with screw terminals along the bottom

Retrofit PSU 12V

Outputs 12 V DC at 5 A. Unit supports an optional 12 V sealed lead-acid backup battery that keeps the hub running during power outages.

PoE Over 2-Wire Retrofit Extender, a pair of slim white units with a network port on top and a coaxial connector below

Retrofit Extender

Pair of extenders designed for retrofit work. Extends PoE over existing twisted-pair or coaxial cable runs for the network.

Pictures and figures are the manufacturer's own.

Management in the Access application

Credentials, schedules and emergency modes are managed in one application. Local NFC storage on the hub ensures doors keep unlocking if the console malfunctions or loses internet access.

Screenshots are the manufacturer's own.

Compatibility requirements

Frequently asked questions

Start your access control retrofit

Call (844) 422-7000 to book a walkthrough in Charleston, Mount Pleasant or Savannah.

CharlestonMount PleasantNorth CharlestonSummervilleBeaufortBlufftonHilton HeadSavannah
Call (844) 422-7000
CloudCentric · Mount Pleasant, SC · serving Charleston and the Lowcountry(844) 422-7000