Switch Pro 24 PoE (USW-Pro-24-POE (400W))
Supplied and installed · Charleston & the LowcountryUbiquiti UniFi · USW-Pro-24-POE (400W)
Switch Pro 24 PoE
A 24-port, Layer 3 switch capable of high-power PoE++ output.
In short
(16) GbE PoE+, (8) GbE PoE++ ports
(2) 10G SFP+ ports
400W total PoE availability
DC power backup-ready
Layer 3 switching
Near-silent cooling
Full specifications
Manufacturer data for the USW-Pro-24-POE (400W).
Overview
| Dimensions | 442 x 285 x 44 mm (17.4 x 11.2 x 1.7") |
| Port Layout · 1 GbE RJ45 | 24 (16 PoE+; 8 PoE++) (1G/100M/10M) |
| Port Layout · 10G SFP+ | 2 (10G/1G) |
| Max. PoE Output | Up to PoE++ |
| Total PoE Availability | 400W |
| Redundancy | DC Power BackupWith UniFi RPS |
| Form Factor | Rack mount (1U) |
Performance
| Switching Capacity | 88 Gbps |
| Total Non-Blocking Throughput | 44 Gbps |
| Forwarding Rate | 65 Mpps |
| Supported VLANs | 1,000 |
| MAC Address Table Size | 16,000 |
| IPv4 Static Routes | 2 |
| Packet Buffer Size | 2 MB |
| Access Lists · IPv4 | 128 |
| Access Lists · MAC | 128 |
Hardware
| PoE Ports · PoE+ | 16 |
| PoE Ports · PoE++ | 8 |
| Max. PoE Wattage per Port by PSE · PoE | 15.4W |
| Max. PoE Wattage per Port by PSE · PoE+ | 30W |
| Max. PoE Wattage per Port by PSE · PoE++ | 60W |
| Max. Power Consumption | 50W (Excluding PoE Output) 450W (Including PoE Output) |
| Power Method | (1) Universal input, 100–240V AC, 50/60 Hz (1) USP RPS DC input |
| Power Input Method | AC input |
| Power Supply | AC/DC, internal, 450W |
| Supported Voltage Range | 100–240V AC |
| Management | Ethernet AR |
| Heat Dissipation | 170.6 BTU/hr (Excluding PoE Output) |
| Weight | Without mounting brackets: 4.3 kg (9.5 lb) With mounting brackets: 4.4 kg (9.7 lb) |
| Enclosure Material | SGCC steel |
| Supported Rack Depth | 400~1200 mm (15.7-47.2") |
| LCM Display | 1.3" touchscreen |
| ESD Protection | Air: ± 16kV, contact: ± 12kV |
| Ambient Operating Temperature | -5 to 40° C (23 to 104° F) |
| Ambient Operating Humidity | 10 to 90% noncondensing |
| Certifications | CE, FCC, IC, Anatel: 13790-20-08356 |
Software
| Application Requirements · UniFi Network | Version 5.10.5 and later |
What the install covers
PoE sends power down the same cable as the data, so cameras, phones, door readers and access points need no socket at the far end.
Sizing is port count plus total power draw plus headroom. Install covers mounting, uplinks, VLANs and a labelled patch panel.
Questions we get asked
What is PoE and why does it matter?
Power over Ethernet sends power down the same cable as the data, so cameras, phones, door readers and access points do not need a power socket where they are mounted. It is what makes a clean install possible.
How do I know what size switch I need?
Port count plus total power draw plus headroom. The power budget is the part that gets underestimated - a switch can have enough ports and still not enough watts.
Get a price on the USW-Pro-24-POE (400W)
Tell us the building and what it has to cover. We quote the equipment and the installation together.
(844) 422-7000Product names, images and technical specifications are Ubiquiti Inc.'s, reproduced from the manufacturer's published product data for the equipment we supply. UniFi and Ubiquiti are trademarks of Ubiquiti Inc. CloudCentric is an independent installer and is not affiliated with Ubiquiti Inc.